Owner`s manual

PRODUCT OVERVIEW
eng 5
Alarm Warning with Descriptive Text
[ SHOW ]
SYS FAULT
24184
The "SYS FAULT" bar indicates there is a
problem in the system. "SHOW" displays
the faulty component.
[ MORE ]
[ NEXT ][ EXIT ]
STBD SYSTEM FAULT
<FAULTY COMPONENT>
24186
STBD SYSTEM FAULT
The top bar indicates the system with the
faulty component. The scrolling text
displays the faulty component. "NEXT"
displays the next fault. "MORE" displays a
detailed description of the fault.
[ ACTION ]
[ NEXT ][ EXIT ]
STBD SYSTEM FAULT
<FAULT DESCRIPTION>
24187
The scrolling text explains in detail the
description of the fault. "ACTION"
displays the course of action required by
the operator.
[ BACK ]
[ NEXT ][ EXIT ]
STBD SYSTEM FAULT
<CORRECTIVE ACTION>
24189
The scrolling text displays the course of
action required by the operator.
EMISSION CONTROL FAULTS WITH DESCRIPTIVE TEXT
When a problem is detected with the Emission control system,
the screen will flash between an engine icon that shows the text
"OBD SERVICE SOON" and the system fault screen. These two
screens will continue to flash until the "+" button is pressed to
display the control fault.
If the problem can cause immediate engine damage, the Engine
Guardian System will respond to the problem by limiting engine
power. Immediately reduce the throttle speed and refer to the
warning messages on the following pages. Refer to the engine
Operation, Maintenance, and Warranty Manual for further
explanation of the problem and the correct action to take.
The alarm message will stay displayed until the "MODE/
SELECT" button is pressed. If there are multiple alarms, these
will cycle on the display at five‑second intervals.