Owner`s manual

PRODUCT OVERVIEW

2 eng

PRODUCTS WITH EMISSIONS CONTROL

After the ignition is turned on, the tachometer will display the

name of the gauge and the version of the software for

approximately two seconds. In the upper left‑hand corner of the

display, a small engine icon will also be visible. The icon is a

representation the power package has emissions control

onboard diagnostics, also known as OBD. The icon will only be

seen during the key up process unless a system fault is

detected. When a fault is detected, the OBD icon will be

displayed in the upper left‑hand corner on all system screens.

a - OBD icon

b - Software version

Automatic Engine Detection Feature

The System Tachometer/Speedometer has an automatic engine

detection feature. This feature automatically detects which

engine type is used and configures the gauge to match that

engine type.

The first power up of the gauge, or after a Master Reset, the

gauge will display "AUTODETECT". Press the "MODE/SELECT"

button to start the automatic engine detection feature and the

gauge will determine the engine type. This will preset the data

monitoring screens to make the initial setup easier.

AUTODETECT

ENGINE SMARTSCREEN

PRESS MODE/SELECT TO START

24298

If the gauge shows a warning of "NO STARBOARD ENGINE" or

"MULTIPLE STARBOARD ENGINES", the engine location (port

and starboard) must be selected by an authorized dealer

equipped with the computer diagnostic system (CDS) tool.

MERCURY

13469

S Cmart raft v X.X