Owner`s manual

SMART TOW
eng 47
IMPORTANT: Only the Smart Tow Speedometer can toggle
between cruise control "RPM MODE" and "SPEED MODE."
Smart Tow Tachometer can change from "SPEED MODE" to
"RPM MODE" only.
1. Press "+" or "–" to bring up the cruise control display screen.
2. Push the "SELECT" button to highlight "SET LAUNCH."
3. Push "+" to raise the setting and push "–" to lower the
setting.
4. Launch control will automatically turn on with the cruise
control.
If the cruise control is engaged and none of the numerical or
customized launch control settings are selected ("CRUISE" is
displayed), launch acceleration is controlled by the throttle up to
the RPM set point.
The display screen will revert back to the "RPM SET" screen
after five seconds of inactivity. Push the "SELECT" button to
highlight the "SET LAUNCH."
CANCELING LAUNCH CONTROL
The launch control will turn off when the cruise control is turned
off.
Creating a Customized Launch Setting
Beyond launch setting number 5 are eight customized launch
settings. Each customized launch setting name can have up to
seven alpha characters to identify the custom launch. The
custom launch setting can be controlled by RPM or speed. To
use the speed setting control, GPS must be interfaced with the
SmartCraft gauge through a junction box.
NOTE: If the Smart Tow set point is changed while the
customized launch is active, the set point will automatically be
saved for that user .
1. Press the "SELECT" button to highlight "SET LAUNCH."
2. Advance the launch control setting beyond number 5. After
number 5 the "NEW USER" launch control setting will
activate.