Owner`s manual

SMART TOW
46 eng
Set the launch control with either the Smart Tow Tachometer or
Smart Tow Speedometer. The settings are 1, 2, 3, 4, and 5, with
1 the most gradual acceleration and 5 the most aggressive.
Press "SELECT" once to highlight the launch control setting.
Press "+" to increase launch control setting and "–" to decrease
the launch control setting. This can be accomplished in either
"RPM MODE" or "SPEED MODE." The launch control setting will
remain until changed.
23481
If the cruise control is engaged and none of the numerical launch
control settings are selected ("CRUISE" is displayed), launch
acceleration is controlled by the PCM up to the RPM set point.
The display screen will revert back to the "RPM SET" screen
after five seconds of inactivity. Push the "SELECT" button to
highlight the launch control display screen.
SETTING LAUNCH CONTROL
There are two modes of launch control: "RPM MODE" and
"SPEED MODE." Set the launch control to "SPEED MODE" with
Smart Tow Speedometer. Cruise control will inherit the mode of
control selected.
Press and hold the "SELECT" button for approximately three
seconds to toggle between "SPEED MODE" and "RPM MODE."