Owner`s manual

SMART TOW
44 eng
Press and hold the "SELECT" button for approximately three
seconds to toggle between "SPEED MODE" and "RPM MODE".
IMPORTANT: Only the Smart Tow Speedometer can toggle
between cruise control "RPM MODE" and "SPEED MODE".
Smart Tow Tachometer can change from "SPEED MODE" to
"RPM MODE" only.
ENGAGING THE CRUISE CONTROL
1. Push either the "+" or "–" button to bring up the cruise
control display screen.
2. Set the speed to 10 MPH.
3. Push "+" and "–" button simultaneously to engage the cruise
control. When the throttle is in the wide open throttle
position, the engine RPM will increase until the set speed is
attained.
4. After cruising at 10 MPH for 20 seconds, increase the speed
1 MPH.
5. After cruising at 11 MPH for 20 seconds, increase the speed
1 MPH.
6. Continue this speed increment process until the craft has
reached its maximum speed.
CANCELING THE CRUISE CONTROL
To cancel the cruise control: press the "+" and "–" buttons
simultaneously.
When the cruise control is disengaged, it will remember the set
speed. It will return to that speed when the cruise control is
engaged and the throttle is positioned beyond the set cruise
speed.
Press "SELECT" twice to exit the cruise control screen.
IMPORTANT: Performing a Master Reset will return all the
calibrations to the factory default settings.