Owner`s manual

SC 1000 SPEEDOMETER
32 eng
Calibration Menu
( NO ) ( SKIP ) ( YES )
46461
CALIBRATION
USE GPS TIME
DISABLED
When a GPS is installed and the GPS is
enabled, the speedometer will display time
received by the GPS. This is useful to
automatically update the time when crossing
time zones.
[DOWN] [SAVE] [ UP ]
CALIBRATION
UTC ZONE
UTC CORRECTION = 0 H
30197
When the GPS time is enabled, the UTC
zone can be changed from –13 H to 13 H.
Press "–" to select "DOWN", or "+" to select
"UP."
(DOWN) (SAVE) ( UP )
23536
CALIBRATION HOUR
1:42
PM
Adjusts the hours to match your local time.
Select "DOWN" or "UP" to change the hour
setting.
(DOWN) (SAVE) ( UP )
23538
CALIBRATION MINUTE
1:42
PM
Adjusts the minutes to match your local time.
Select "DOWN" or "UP" to change the minute
setting.
Speedometer Screens
This calibration turns the system display screens on and off.
NOTE: Depending on the engine model and vessel options, not
all screens will apply.
1. Press the "MODE/SELECT" and "+" buttons simultaneously
for approximately seven seconds until "SCREENS" is
display screen.
2. Press the "–" or "+" button to select the option choice
displayed in the [ ] brackets on the screen.
3. Press "MODE/SELECT" to save the setting and advance
through the calibration selections.
SCREENS
Speedometer Display Screens
( NO )
( SAVE ) ( YES )
46462
TO WAYPOINT SCREEN ?
YES
To waypoint screen is displayed "YES" for on
or off "NO." GPS screens must be turned on
for this screen to be activated.