Owner`s manual

SC 1000 SPEEDOMETER
eng 27
Speedometer Display Screens
NOTE: Depending on the engine model and vessel options, not
all screens will apply.
0
SPEED
10
20
30
40
50
60
70
80
5:30 PM
70
60
F
AIR
F
SEA
FUEL 1
E
F
GAL90
E
F
TABS
STBDPORT
1
2
3
4
5
FUEL 2
GAL
110
0% 0%
INST M/G AVG
1.5
3.2
RESET
46451
When the ignition is turned on, the speedometer will show the
last screen that was displayed before the ignition was turned off.
Press "MODE/SELECT" to change display screens. Revert back
to the previous screen by pressing and holding "MODE/
SELECT" for two seconds.
NOTE: Readings can be displayed in English (U.S.) or metric.
Refer to Speedometer Screens .
NOTE: The descriptions may not be in order on the gauge. The
order may change depending on engine type.
1.
Clock ‑ Temp: Clock, air temperature, and water
temperature. The air and water temperature sensors must
be connected to obtain display readings.
2.
Fuel 1: Displays the amount of fuel remaining in fuel tank 1.
3.
Fuel 2: Displays the amount of fuel remaining in fuel tank 2,
water/waste tank level (if applicable.) This screen will
automatically display engine oil tank for an OptiMax
outboard.