Owner`s manual

SC 1000 TACHOMETER
16 eng
3. If the amount of time since the last scheduled maintenance
has passed 100 hours, the screen will show "PERFORM
SCHEDULED MAINTENANCE" and the bar graph will not
be visible. Press "EXIT" to return to the previous screen or
"RESET."
4. After pressing "RESET" the screen goes to the
"MAINTENANCE" screen. The "MAINTENANCE" screen will
display "HAS SCHEDULED MAINT. BEEN PERFORMED?"
Press "YES" to reset the maintenance schedule, or press
"NO" to return to the previous screen.
5. After pressing "YES" the screen will show the bar graph has
been reset to represent 100 hours of operation before the
next scheduled maintenance. Press "EXIT" to return the
"MAINTENANCE OK" screen.
Tachometer Calibration Menu–Speed Control,
Light, and Contrast
46369
TACHOMETER MENU
1. Press the "MODE/SELECT" and "+" buttons simultaneously
for approximately two seconds or until the "MENU" screen
appears.
2. Press "MODE/SELECT" to "SKIP" the speed control and
advance through the calibration menu.
3. Press the "+" or "–" to change the settings.