Owner`s manual

SC 1000 TACHOMETER
eng 15
Maintenance Screen
Some 4‑stroke power package models have the ability to
estimate the amount of run time the engine accumulated since
the last scheduled maintenance. Normal scheduled maintenance
for the engine is 100 hours. The maintenance screen shows a
bar graph approximating the amount of time remaining before a
scheduled maintenance is required. When the maintenance
screen is reset, the bar graph will change to represent the
scheduled maintenance has 100 hours remaining. The
maintenance screen must be turned on for this screen to be
displayed. Your owner's manual maintenance schedule should
be followed regardless of what the gauge displays. To turn this
feature on, refer to Tachometer Display Screens.
1. When the maintenance screen is displayed, press "ENTER"
to see the approximate amount of time remaining before a
scheduled maintenance is recommended.
MAINTENANCE
OK
[ENTER]
SCHED. MAINTENANCE
OK
OK
[EXIT]
[RESET]
PERFORM SCHEDULED MAINTENANCE
OK
[EXIT]
[RESET]
MAINTENANCE
[ NO ][YES ]
HAS SCHEDULED MAINT.
BEEN PERFORMED?
SCHED. MAINTENANCE
OK
OK
[EXIT]
[RESET]
50359
1
2
3
4
5
2. The scheduled maintenance screen displays a bar graph
indicating the estimated time remaining on the scheduled
maintenance cycle. Press "EXIT" to return to the previous
screen or "RESET" after the scheduled maintenance has
been performed.