Owner`s manual

SC 1000 TACHOMETER
12 eng
System Tachometer Display Screens
When the ignition is turned on, the tachometer will display the
last screen that was visible before the ignition was turned off.
Press "MODE/SELECT" to change display screens. Revert back
to the previous screen by pressing and holding "MODE/
SELECT" for two seconds.
NOTE: Readings can be displayed in English (U.S.) or metric.
Refer to
Tachometer Screens .
NOTE: Depending on the engine model and vessel options, not
all screens will apply.
F
125
1
2
3
4
5
6
7
OIL
PSI
12.5
150
HOT
F
OIL
COLD
50349
TRIM WATER PSI
12.51.5
TRIM RPM
22051.5
12.5
H20
PSI
VOLTS HOURS
12.2
1.5
1.
Temperature: Displays the engine coolant temperature.
2.
Oil Temperature: Displays the engine oil temperature.
3.
Oil Pressure: Displays the engine oil pressure in "PSI" or
"BAR."
4.
Trim and RPM: Displays the engine RPM and trim position.
5.
Power Trim Angle: Displays the trim angle of the outboard
or sterndrive up to the maximum trim angle and then
displays the trailer angle. 0 = down, 10 = maximum trim, and
25 = full trailer.