Owner`s manual

PRODUCT OVERVIEW

eng 9

NOTE: Depending on the engine model and vessel options, not

all screens will apply.

FAULT

BATTERY

FAULT

SENSOR

WATER TEMP

OIL TEMP

46353

ENGINE

DATA BUS

IGNITION

NO STARBOARD

ENGINE

MULTIPLE STARBOARD

ENGINE

8V 18V

FAULT ‑ IGNITION: A problem has developed in the ignition

system.

10.

BATTERY: The electrical system is not charging or the

battery charge is low.

11.

ENGINE DATA BUS: The data communication link between

the tachometer and engine is not connected.

12.

FAULT ‑ SENSOR: One of the sensors is not functioning

correctly.

13.

FAULT ‑ WATER TEMP: The sensor for measuring outside

lake/seawater temperature is not functioning correctly.

14.

FAULT ‑ NO STARBOARD ENGINE: The instrument does

not detect the starboard engine computer. This usually

indicates that no data is being transferred from the engine's

computer to the gauge. Check the wiring. Make sure both

terminator resistors are installed in the bus. Make sure the

PCM/ECM's are not configured for the same location using

computer diagnostic system (CDS).

15.

FAULT ‑ MULTIPLE STARBOARD ENGINE: SmartCraft

gauges are recognizing multiple engines as starboard.

NOTE: In multiple engine applications, each engine must be

assigned a position (starboard, port, starboard2, or port2) with a

CDS before the system will function properly.