User guide

ManualsBrandsMercury ManualsExternal Hard DrivesOWC Elite Pro

1

2

3

4

5

6

7

8

9

OWC MERCURY ELITE PRO DUAL MINI

SYSTEM SETUP

5

5. Place your drives in the

inner chassis as shown to

the right. Press each drive

toward the rear of the inner

chassis to make sure that

the drives are fully seated in

the SATA connectors.

6. Use one hand to

hold both drives down,

then ﬂip over the inner

chassis. There are eight

screw holes on the bot-

tom of the inner chassis,

as circled in red.