Owner`s manual

Mercury Mambo Powered Wheelchairs Part Code: Z20945 (Rev B)

Owners Manual Page 17 of 28

To adjust the footrest height

♦ Remove the nut and bolt securing the footplate bracket (shown by

arrow in the photograph).

♦ Adjust the bracket to the required height.

♦ Reattach the bracket to the powerchair using the nut and bolt.

5.10 HOW TO SET FREEWHEEL MODE

For your convenience, your Mambo powerchair is equipped with a freewheel lever. This allows you to

disengage the drive motors and electromagnetic brakes so you can manoeuvre the powerchair manually.

To engage the powerchair in DRIVE mode

♦ It is advisable to ensure the powerchair is switched off

♦ Turn the freewheel lever on both motors to the DRIVE position

♦ Switch the powerchair on and use as normal

To engage the powerchair in FREEWHEEL mode

♦ Switch off the powerchair

♦ Turn the freewheel lever on both motors to the FREEWHEEL position

♦ Manoeuvre the powerchair manually

 Warning:

Do not use the powerchair whilst the drive motors are disengaged unless you are in the presence of an

attendant. Do not disengage the drive motors when the powerchair is on a gradient. The powerchair could

roll down on its own, causing injury or damage.

Above: Freewheel leve