Owner`s manual

Mercury Mambo Powered Wheelchairs Part Code: Z20945 (Rev B)
Owners Manual Page 16 of 28
5.8 MAMBO MIDWHEEL SEAT OPERATION
Rotating the Seat
♦ The seat can rotate 180°, and the seat locks at 45° intervals. This
allows the user to swivel the seat to the left or right for easier
access to desks, tables, etc.
♦ To rotate the seat, first push up on the seat rotation lever. Whilst
holding the lever, swivel the seat in to the required position.
Then release the lever and continue swiveling the seat until it
locks in position.
To remove the seat:
♦ Ensure the powerchair is switched off and not in freewheel mode.
♦ Push up on the seat rotation lever, and rotate the seat slightly so it is not locked in position.
♦ Pull up on the seat to remove, taking caution as the seat is heavy
To change the seat height
♦ Remove the seat, as described above and remove the shroud.
♦ Release the seat post camlock mounted on the seat post receiver.
♦ Disengage and remove the seat height adjustment bolt from the seat post.
♦ Reposition the seat post at the desired height.
♦ Reinsert the bolt in to the seat post and secure with the nyloc nut.
♦ Lock the seat post in position with the seat post camlock.
♦ Reinsert the seat, as described above.
5.9 HOW TO ADJUST THE FOOTREST
To adjust the footrest angle
♦ You can adjust the angle of the footrest with a M6 allen key
♦ Turn the setscrew (arrow 1 opposite) clockwise to raise the front of
the footrest
♦ Turn the setscrew (arrow 1 opposite) anticlockwise to lower the
front of the footrest