Owner`s manual

Mercury Mambo Micro Powerchair Owner’s Handbook (Page 7) Part code: Z20943-00
3. Parts Description
1
2
7
8
9
3
4
5
6
Parts Description
1. VR2 controller (remote)
2. Armrest pad
3. Seat back
4. Seat base
5. Drive (rear) wheel
6. Freewheel device
7. Castor wheel
8. Foot plate
9. Battery pack
10. Reset button (circuit breaker)
11. Swivel seat lever
10
11
4. Operation
On / Off Button
Horn
Battery Gauge
Speed / Profile Indicator
Increase Speed / Profile
Decrease Speed / Profile
Charger and
Programmer socket
Control Panel
(see previous
diagram)
Joystick
Joystick Control Panel (shown above)
1. Joystick. The primary function of the
joystick is to control the speed and direction
of the powerchair. The further you push the
joystick from the centre position the faster
the powerchair will move. When you
release the joystick the electromagnetic
brakes are automatically applied.
2. On / Off button. The on/off button applies
power to the control system electronics,
which in turn supply power to the
powerchair’s motors. Do not use the on/off
button to stop the powerchair unless there is
an emergency. (If you do, you may shorten
the life of the powerchair drive
components). The battery gauge shows you