User`s manual

1: Introduction
Chapter 1
Introduction
This mainboard has a Socket-A support for the AMD K7
processors. The Socket-A processor’s front-side bus speed is
200/266MHz.
This mainboard has a KM266 chipset that supports a 4X AGP slot
for highly graphics display, 100/133 MHz DDR/SDR, and Ultra
DMA ATA100 function to provide outstanding high system
performance under all types of system operations. The mainboard
has the built-in AC97 Codec, a CNR (Communications and
Networking Riser) slot and a built-in 10BaseT/100BaseTX
Network Interface. This mainboard has the 128-bit 2D/3D AGP
Graphics Accelerator with 32MB frame buffer, supporting AGP
4X 266MHz mode up to 1GB/s bandwidth, which provides a direct
connection between the graphics sub-system and memory so that
the graphics do not have to compete for processor time with other
devices on the PCI bus. There is a full set of I/O Ports including
PS/2 keyboard and mouse ports, two back-panel USB ports, one
parallel port, one serial port and one onboard VGA (S3).
Connecting extended USB modules to the mainboard makes six
extra USB ports (headers USB2, USB3 and USB5).
This mainboard has all the features you need to develop a powerful
multimedia workstation that is network ready. The board is Micro
ATX size and has power connectors for an ATX power supply.
1