User`s manual

MODEM2
The fax/modem card is an optional item supplied with this mainboard.
1. Locate the J1 fax/modem connector on the mainboard.
2. Remove the expansion slot blanking plate from the system chassis
that is adjacent to the fax/modem connector.
3. Install the fax/modem card on to the MODEM2 connector as shown
below. The RJ11 Line and Telephone sockets on the bracket are
positioned in the expansion slot with the removed blanking plate.
MODEM2
fax/modem
connector
Fax/modem
card
Line and Tel
RJ11 sockets
32