User`s manual

Check the Jumper Settings

Check all the mainboard jumpers to ensure that the board is configured

correctly.

JP2

JP3

JP4

JP1

JP1 Clear CMOS Memory Jumper

This jumper lets you erase the system setup settings that are stored in

CMOS memory. You might need to erase this data if incorrect settings

are preventing your system from operating. To clear the CMOS memory,

turn off the system, disconnect the power cable from the mainboard, and

short the appropriate pins for a few seconds.

Function Jumper Cap

Normal Operation Short pins 1-2

Clear CMOS Short pins 2-3

JP2: Keyboard Power On Jumper

This jumper lets you use a typed-in password as a power switch to turn

your system on. If you enable this property, you need to define the

password or the hot keys using the setup utility. See Chapter 3.

Function Jumper Cap

Disable keyboard power on Short pins 1-2

Enable keyboard power on Short pins 2-3

1 2 3

JP2

JP1