User`s guide

Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
OnBoard MIDI Port
Use this item to enable or disable the onboard
MIDI port, and to assign a port address.
MIDI Port IRQ
Select
Use this item to assign an IRQ to the MIDI port.
OnBoard Game
Port
Use this item to enable or disable the onboard
Game port.
Onboard IDE
Use this item to enable or disable either or both
of the onboard Primary and Secondary IDE
channels.
Ultra DMA Support
Use this item to set Ultra DMA support for IDE
devices on the Primary or Secondary IDE
channels. You must enable this or UDMA
devices will not work at their intended speed.
OnBoard AC’ 97
Audio/Modem
Use these items to enable or disable the
onboard audio/modem.
USB Function
Enable this item if you plan to use the USB
ports on this mainboard.
USB Function for
DOS
Enable this item if you plan to use the USB
ports on this mainboard in a DOS environment.
32