User`s guide

Features Setup Page
This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial Port1 3F8h/COM1
OnBoard Serial Port2 2F8h/COM2
Ir Function Disabled
Ir Duplex Mode N/A
OnBoard Parallel Port 378h
Parallel Port Mode Normal
Parallel Port IRQ 7
Parallel Port DMA N/A
OnBoard MIDI Port 300H
MIDI Port IRQ Select 9
OnBoard Game Port 208H
OnBoard IDE Both
Ultra DMA Support Disabled
OnBoard AC’97 Audio Enabled
OnBoard AC’97 Modem Enabled
OnBoard USB Function Enabled
USB Function for DOS Disabled
ESC : Quit ↑↓←→ : Select
Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Port1/2
Use this item to enable or disable the onboard
COM1/2 serial port, and to assign a port
address
IR Function
Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
IR Duplex Mode
Use this item to define if the optional infrared
port is full-duplex or half-duplex.
Onboard Parallel
Port
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
31