User`s guide

Install the Extension Brackets
The extension brackets connect the mainboard’s features to
external connectors attached to the system chassis. Follow the steps
below to install the extension brackets.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Audio Ports and Game/MIDI Port Extension Bracket
This bracket provides three audio jacks for stereo line in, stereo
line out and microphone. In addition it has a 15-pin D-connector
which can be used by either a joystick or a MIDI device.
1
SOUND1-
A
udio Header
Game/MIDI
Stereo Line-out
Microphone
Stereo Line-in
A
udio Ports & Game/MIDI
Extension Bracket
1. On the mainboard, locate the SOUND1 audio header for this
bracket.
2. Plug the cable from the bracket into the audio header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
13