User`s guide

Install A CPU

This mainboard has a Socket 370 supporting FCPGA Celeron,

FCPGA Pentium III and Tualatin/Tualatin Celeron processors.

Do not support PPGA Celeron processor.

To ensure reliability, ensure that your processor has a

heatsink/cooling fan assembly.

Do not try to install a Socket 7 processor in the Socket-370. A

Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6

does not fit in the Socket 370. Do not try to install PPGA

Celeron processor in Socket-370.

The following list notes the processors that are currently supported

by this mainboard.

FCPGA Celeron: 300~700 MHz, FSB: 66 MHz

FCPGA Pentium III: 500~1130MHz, FSB: 100MHz, 133MHz

Tualatin/Tualatin Celeron: up to 1.2GHz, FSB: 100MHz

Installing a Socket-370 Processor

A processor installs into the ZIF (Zero Insertion Force) Socket-370

on the mainboard.

1. Locate the Socket-370 and CPUFAN1. Pull the locking lever

out slightly from the socket and raise it to the upright position.

Pin-1 Corner

Socket-370

CPUFAN1

2. On the processor, identify the Pin-1 corner by its beveled edge.