User`s manual

2: Mainboard Installation
Optional Extension Brackets
For this mainboard, you can also obtain an ATX form card. Install
them by following the steps below.
ATX Form Card
This ATX Form Card provides a mini-DIN port for infrared, one
mini-DIN port for a PS/2 mouse. In addition it has two USB
(Universal Serial Bus) ports.
1
1. On the mainboard, locate the J3 ATX header for this bracket.
2. Plug the cable from the bracket into the ATX header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
PS/2 Mouse
Port
A
TX Form Card
USB Ports
Infrared Port
J3-ATX Header
17