User`s manual

2: Mainboard Installation
Serial/Parallel Ports Extension Bracket
This bracket has one serial port - COM1 (9-pins) and one parallel
port –PRN1 (25pins). On this mainboard, you can only connect one
of the serial ports to the manboard header COM1.
Serial/Parallel Ports
Extension Bracket
1
1
COM1
Parallel Port
LPT1
Serial Port
COM1
LPT1
1. On the mainboard, locate the headers COM1 and LPT1 for
this bracket.
2. Plug the serial cable into COM1 and the parallel cable into
LPT1.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
15