Specifications

CD587

Power Package Layup

IMPORTANT: This service should be performed by an Authorized MerCruiser Dealer.

CAUTION

The engine must be prepared for long storage periods to prevent internal corrosion and severe dam-

age.

IMPORTANT: If boat has already been removed from water, before starting engine a source of water

must be supplied to water intake (inlet) openings. Follow all warnings and flushing attachment proce-

dures stated in “FLUSHING COOLING SYSTEM”.

CAUTION

DO NOT operate engine without water flowing thru seawater pickup pump, as pump impeller may be

damaged and subsequent overheating damage to engine or transmission may result.

1 Start engine and run until it reaches normal operating temperature. Stop engine. Change oil and filter. Start

engine and run for about 15 minutes. Check for oil leaks.

WARNING

Do not remove coolant cap when engine is hot - coolant may discharge violently.

IMPORTANT: Closed cooling section must be kept filled year-round with the specified coolant.

IMPORTANT: Do not use Propylene Glycol Antifreeze in the closed cooling section of the engine.

IMPORTANT: Drain seawater section of closed cooling system only.

NOTE: Refer to the following pages for continuation of specific draining instructions.