Specifications

81
CA77
Propeller
WARNING
Remote Control must be in NEUTRAL and ignition key removed from switch before removing and/or
installing propeller.
WARNING
Place a block of wood between anti-ventilation plate and propeller to protect hands from propeller
blades and to prevent propeller from rotating when removing propeller nut.
CAUTION
Periodically check propeller nut for tightness during boating season. A minimum of 55 lbs. ft. (75 N·m)
torque is required.
CD582
REMOVAL (BRAVO TWO)
1 Place wood block between propeller blade and anti-ventilation plate to prevent rotation. Straighten bent tabs
on tab washer.
2 Turn propeller shaft nut counterclockwise to remove nut.
3 Slide tab washer, continuity washer, propeller and thrust hub off propeller shaft.
CB157
REMOVAL (BRAVO THREE)
4 Place wood block between propeller blades and anti-ventilation plate to prevent rotation.
5 Turn aft propeller shaft nut counterclockwise to remove nut.
6 Slide propeller and thrust hub off propeller shaft.
7 Turn front propeller shaft nut counterclockwise to remove nut.
8 Slide propeller and thrust hub off propeller shaft.