Service manual

ENGINE MECHANICAL
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 3A-83
Reassembly
1. Install the bevelled end of the outer rotor towards the pump gear.
2. Ensure that the rotor and gear coupling resists a rolling torque of 9 kgm (32.4 oz.).
Installation
1. Install oil pump in cylinder block. Torque screws to 27.5 Nm (20 lb-ft).
70292
a
b
a-Screws (3)
b-Oil Pump
2. Install timing gear cover.