Specifications

STORAGE
SECTION 6
CMD-4081850 / 90-860094030 SEPTEMBER 2003 Page 131
11. After seawater section of cooling system has been drained completely, coat threads of
intercooler drain plug with sealant and install. Tighten plug securely.
Description
Where Used Part Number
Perfect Seal Intercooler drain plug threads 92-34227-1
12. Reconnect hoses. Tighten hose clamps securely.
13. Replace end cover gaskets and seals if worn or deteriorated. Install all four end cover
assemblies on the heat exchanger.
14. Torque the end covers on the upper and lower heat exchanger sections.
Description
Nm lb-in. lb-ft
Upper heater exchanger end covers 14-15 120-132
Lower heat exchanger end covers 11-14 108-120
CAUTION
Sterndrive unit should be stored in full DOWN / IN position. Universal joint bellows
may develop a set if unit is stored in the raised position and may fail when unit is
returned to service.
15. Store boat with sterndrive unit in full DOWN / IN position.