Service manual

DUAL POWER TRIM SYSTEM
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 5C-9
Installation
1. Replace switch.
22086
b
a
a-Bezel Nut
b-Switch
2. With new switch properly positioned in control panel, loop leads through their respective
terminal eyelets. Refer to Wiring Diagram.
3. Using 60/40 (tin/lead) alloy rosin core solder, solder leads to terminals.
4. Secure trim control panel to dash.
22086
a
c
b
a-No. 10-24 Studs
b-Flat Washers And Nuts
c-U-Bracket
INDEX