Service manual

OILDYNE TRIM PUMP SERVICE MANUAL NUMBER 28
Page 5A-6 90-863160 MAY 2000
7. Lower the sterndrive unit to the full IN/DOWN position and refill the trim pump to the
proper level. Run the trim system IN/DOWN and OUT/UP several times and recheck the
fluid level.
50389
a
b
c
a-IN/DOWN Trim Hose
b-Hydraulic Connector
c-Plug (22-38609)
Testing Power Trim Pump
CAUTION
Cross connecting trim hoses will damage the sterndrive housing. Appropriately
mark trim hoses and hose connections to ensure proper reassembly.
Test Gauge
1. Check the trim pump oil level. Fill if necessary.
2. Place the sterndrive unit in the full IN/DOWN position.
INDEX