Service manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-50 90-863160 MAY 2000
13. Lubricate sleeve outer diameter with soapy water or engine cleaner and install sleeve
installation tool and a suitable driving rod.
76898
a
b
c
b
c
a-Sleeve
b-Sleeve Installation Tool (91-818162)
c-Suitable Driving Rod
14. Position water hose so that approximately 1/8 in. (3 mm) protrudes from edge of bell
housing opening.
b
a
a-Bell Housing
b-Water Hose
a. Apply a small amount of 2-4-C Marine Lubricant with Teflon to hose inner diameter
and install tapered inserts using the tapered insert tool.
a
b
a-Tapered Insert
b-Tapered Insert Tool (P/N 91-43579)
INDEX