Manualshelf

Service manual

ManualsBrandsMercury ManualsBoatBravo Three
381382383384385386387388389390
SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 4B-47
4. Apply Loctite 242 to threads of screws and install. Torque screws to 25-30 lb.in. (2.8-
3.3 N⋅m).
71825
a
a-Screws
Standard And High Performance Transom Assemblies
1. Install speedometer hose clip onto bell housing.
22121
a
b
a-Speedometer Hose Clip
b-Bell Housing
2. Clean exhaust bellows mounting flange on bell housing with sandpaper and wipe clean
with lacquer thinner.
WARNING
Be sure to read and follow package label directions when using bellows adhesive.
3. Apply bellows adhesive to mounting surface on inside of bellows. Allow to dry
(approximately 10 minutes), before installing.
4. Position grounding clip on bellows.
INDEX