Service manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 4B-45
Bell Housing Installation
Standard Transom Assembly
1. Install fiber washers on gimbal ring.
2. Secure with Resiweld Sealer.
3. Ensure that washer pilots on hinge pin bushing.
22454
a
b
c
a-Fiber Washers
b-Gimbal Ring
c-Hinge Pin Bushing
4. Install bell housing.
5. Clean threads and apply Loctite 271 to threads of hinge pins (port and starboard).
6. Install hinge pins and torque to 145 lb-ft (197 Nm).
22113
b
a
a-Hinge Pin Tool (91-78310)
b-Torque Wrench
INDEX