Service manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 4B-43
10. Tighten steering lever clamping bolt and nut. Torque 50 lb-ft (68 Nm).
70157
a
b
Engine And Transom Assembly Installed
a-Wrench
b-Socket Wrench
22460
a
b
Engine And Transom Assembly Removed
a-Wrench
b-Wrench
11. Install steering lever ground wire. Wire must be positioned as shown. Tighten securely.
22028
b
a
a-Ground Wire
b-Screws
12. Install anchor pin and snap rings.
INDEX