Service manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY

SERVICE MANUAL NUMBER 28

90-863160 MAY 2000 Page 4B-37

Reassembly

1. Driveshaft Housing - insert spring, check ball and seal cup. Press or tap carefully on

seal cup until outer face is flush with casting surface. Do not use sealant.

2. Bell Housing - coat O-rings with gear lube. Insert check valve assembly into

passageway. Place 3/8 in. deep wall socket over valve end and tap into casting until

shoulder surface “e” is flush with casting surface.

50321

a-Seal Cup

b-Check Ball

c-Spring

d-Bell Housing Check Valve Assembly

e-Surface Flush with Casting

f-O-rings (2)

g-Valve End

INDEX