Service manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-12 90-863160 MAY 2000
11. Remove speedometer tubing clip from bell housing.
22121
a
b
a-Bell Housing
b-Speedometer Tubing Clip
12. On Standard Transom Assembly - Remove hinge pins from port and starboard sides.
22113
a
b
a-Bell Housing
b-Hinge Pins
13. On High Performance Transom Assembly - Remove hinge pins using special tool
(91-63616) and slide hammer as follows:
a. Remove hinge pin screws.
71825
a
a-Hinge Pin Screws
INDEX