Service manual

BRAVO THREE GEAR HOUSING
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 3D-37
3. Install new shim pack of the same thickness as removed into gear housing. If shims were
lost or ruined where original thickness cannot be determined, install a .050 in. (1.3 mm)
shim pack for a starting point.
72272
a
a-Shim Pack
4. Install bearing cup into gear housing. Seat bearing cup against shim pack.
72273
a
b
a-Bearing Cup
b-Shim Pack
CAUTION
Outer propeller shaft bearing retainer has a LEFT- HAND THREAD. Install by turning
COUNTERCLOCKWISE.
IMPORTANT: Bearing carrier and threads on outer propeller shaft bearing retainer
nut must be lubricated to prevent corrosion and cracking in gear housing.
INDEX