Service manual

BRAVO THREE GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3D-32 90-863160 MAY 2000
9. Install drive shaft and pinion gear into gear housing.
NOTE: Be careful not to lose rollers from drive shaft pinion bearing should they drop during
drive shaft installation.
72264
b
a
a-Drive Shaft
b-Drive Shaft Pinion Gear
10. Install pinion washer and screw. Apply Loctite 271 to threads of screw. Torque pinion
screw to 45 lb-ft (61 Nm).
a
b
76877
a-Washer
b-Screw
INDEX