Service manual

BRAVO TWO GEAR HOUSING

SERVICE MANUAL NUMBER 28

90-863160 MAY 2000 Page 3C-25

Driven Gear Bearing

Inspection

1. Remove bearing from driven gear. Inspect both the driven gear and the pinion gear for

pitting, chipped or broken teeth and excessive or uneven wear. Replace both gears if

any of these conditions exist.

2. Replace tapered roller bearing and cup if cup is pitted, grooved, scoured, worn uneven,

discolored from overheating or has metal particles embedded in the cup.

Driven Gear Bearing Removal

1. Remove bearing from driven gear using universal puller plate. Inspect both the driven

gear and the pinion gear for pitting, chipped or broken teeth and excessive or uneven

wear. Replace both gears if any of these conditions exist.

22108

a-Suitable Mandrel

b-Universal Puller Plate

c-Bearing

d-Driven Gear

INDEX