Service manual

BRAVO ONE GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3B-46 90-863160 MAY 2000
2. Position bearing carrier installation tool onto prop shaft as shown below.
3. Slide bearing carrier over installer tool and insert tab washer in gear housing. Position
inner tab in V-notch.
a
c
b
77110
a-Bearing Carrier Assembly
b-Bearing Carrier Installation Tool (91-840388)
c-Heavy Duty Prop Shaft
4. Use bearing carrier retainer nut wrench to tighten bearing carrier retainer nut.
a
a-Bearing Carrier Retainer Nut Wrench (91-840393)
INDEX