Service manual

REMOVAL, INSTALLATION AND ADJUSTMENTS SERVICE MANUAL NUMBER 28
Page 2A-32 90-863160 MAY 2000
9. Shift remote control lever into full forward position. Rear slot in tool should fit over shift
lever stud.
RH ROTATION BRAVO ONE AND TWO, AND ALL BRAVO THREE MODELS: Rear slot
in tool should fit over shift lever stud.
LH ROTATION BRAVO ONE AND TWO MODELS: Forward slot in tool should fit over shift
lever stud.
If slot does not fit over stud, loosen shift lever stud and slide stud up or down, until slot in
tool fits over stud. When adjustment is correct, retighten stud.
23345
b
a
d
c
RH Rotation Bravo One And Two, And All Bravo Three Models
23345
b
d
c
a
LH Rotation Bravo One And Two Models
a-Adjustment Tool
b-Barrel Retainer
c-Shift Lever Stud
d-Shift Lever Adjustment Slot
10. Remove adjustment tool.
11. Lubricate shift cable pivot points with 30W oil.
INDEX