User's Manual

Acrobox (AM114D) User Manual
5
Cautions
Prohibit product disassembly
Physical damage due to electric shock, failure, malfunction, or static electricity. Do not
disassemble, repair, or modify anything. Contact your main office if you need repairs.
Strict adherence to operating conditions
Each product will operate normally within the conditions specified in the Product Specification Table
provided in Chapter 1 Overview in the Handling Manual. Therefore, observe each operating
condition strictly.
Warnings of hazards that may occur under the conditions of the installation site
Do not install or operate the product in places where the temperature is too high or too low, where
there is no ventilation or airtightness, where there is a lot of moisture, dust, or mechanical vibration
to prevent human or physical damage that may result from causing or causing problems in the
product. Since this product is not waterproof, if water permeates, human or physical damage is
caused by electric shock or failure.
Don't wear them with accessories.
Do not wear accessories such as rings, necklaces, or watches when handling products. Metal
products can cause electric shock, static electricity, and fire, resulting in human and physical damage.
Also, do not wear loose clothing, ties, slippers, etc. as they may cause a safety accident.
Electromagnetic Wave Warning
Electromagnetic waves affect this product and cable etc. causing confusion in signal processing,
resulting in abnormal operation. Therefore, do not install or operate this product where
electromagnetic waves are generated.
Electric shock warning
Do not touch the power unit when the power cord is connected. A system with a power switch has
an internal current when the power cord is connected, even if the power switch is turned off.
Warning against overheating
If sufficient space is not available when installing an over-boned product, air escaping from the
surrounding equipment may enter and cause failure and malfunction due to overheating of the
product.