Specifications

This system will be standard on:
· Small-Block MPI V8 Bravo
· Small-Block MPI MIE
· Big-Block MPI Sterndrive
· Big-Block MPI MIE
It will not be available on:
· V6 Sterndrive
· Small-Block Ski
· Small-Block Alpha
System Overview
· Water Separating Filter Element
· 2 pumps – Lift & Pressure
- Lift pump - Gerotor
- Pressure pump – Turbine
· Fuel Pressure Regulator
- New 288 kpa (~42 psi) regulator
- O-rings seal between OD on regulator and ID in cover, rather than a face
seal and return hose
- Regulator dumps excess fuel to inlet side of pressure pump
- Fuel pressure vs. flow characteristics differ slightly from Gen II, requires
minor calibration changes
· Internal Low Pressure Relief Valve
- Limits pressure across lift pump to 10 psi +/- 5 psi
- Dumps fuel to inlet side of filter