Owner's Manual

Oil Change Service Interval* 1 23456789101112131415
Change engine oil and filter ••••••••••••••
Rotate tires, inspect tire wear and measure
tread depth
••••••••••••••
Inspect wheels and related components for
abnormal noise, wear, looseness or drag
••••••••••••••
Perform multi-point inspection (recommended) ••••••••••••••
Inspect automatic transmission fluid level (if
equipped with dipstick); consult dealer for
requirements
••••••••••••••
Inspect brake pads, shoes, rotors, drums, brake
linings, hoses and parking brake
••••••••••••••
Inspect engine cooling system for strength, and
hoses
••••••••••••••
Inspect exhaust system and heat shields ••••••••••••••
Inspect half-shaft boots (if equipped) ••••••••••••••
Inspect steering linkage, ball joints, suspension,
tie-rod ends, driveshaft and U-joints; lubricate
if equipped with grease fittings
••••••••••••••
Inspect cabin air filter (if equipped) •••••••
*Oil change service intervals should be completed as indicated by the instrument cluster message center
Reset your Intelligent Oil Life Monitor™ after each engine oil and filter change; refer to the Instrument Cluster chapter
Scheduled Maintenance Guide
335
2011 Milan (mln)
Owners Guide, 1st Printing
USA (fus)