Owner's Manual
Table Of Contents
- Table of Contents
- Introduction
- Instrument Cluster
- WARNING LIGHTS AND CHIMES
- GAUGES
- MESSAGE CENTER
- Selectable features
- Reset
- Info menu
- Odometer/Trip odometer
- Distance to empty (DTE)
- Average fuel economy (AFE)
- Instantaneous fuel economy (IFE)
- Trip elapsed drive time
- Setup menu
- System check
- Oil Life XXX%
- Units (English/Metric)
- Autolamp delay (if equipped)
- Autolock
- Autounlock
- Blind spot system (if equipped)
- Cross traffic alert system (if equipped)
- Park aid (Reverse sensing system) (if equipped)
- Language
- System warnings
- Selectable features
- Entertainment Systems
- Climate Controls
- Lights
- HEADLAMP CONTROL
- PANEL DIMMER CONTROL
- AIMING THE HEADLAMPS
- TURN SIGNAL CONTROL
- INTERIOR LAMPS
- BULB REPLACEMENT
- Lamp assembly condensation
- Using the right bulbs
- Replacing interior bulbs
- Replacing exterior bulbs
- Replacing headlamp bulbs
- Replacing front parking lamp/turn signal bulbs
- Replacing front side marker bulbs
- Replacing stop/tail/turn/and side marker bulbs
- Replacing rear turn signal bulbs
- Replacing backup lamp bulbs
- Replacing high-mount brake lamp bulb
- Replacing license plate lamp bulbs
- Replacing fog lamp bulbs
- Driver Controls
- MULTI-FUNCTION LEVER
- TILT/TELESCOPE STEERING WHEEL
- ILLUMINATED VISOR MIRROR
- OVERHEAD CONSOLE
- ELECTRONIC COMPASS
- CENTER CONSOLE
- INSTRUMENT PANEL STORAGE COMPARTMENT
- AUXILIARY POWER POINT (12VDC)
- POWER WINDOWS
- INTERIOR MIRROR
- EXTERIOR MIRRORS
- SPEED CONTROL
- STEERING WHEEL CONTROLS (IF EQUIPPED)
- MOON ROOF (IF EQUIPPED)
- INTERIOR TRUNK CONTROL
- Locks and Security
- KEYS
- POWER DOOR LOCKS
- CHILDPROOF DOOR LOCKS
- INTERIOR LUGGAGE COMPARTMENT RELEASE
- REMOTE ENTRY SYSTEM
- SECURICODE™ KEYLESS ENTRY SYSTEM
- SECURILOCK PASSIVE ANTI-THEFT SYSTEM
- PERIMETER ALARM SYSTEM
- Seating and Safety Restraints
- SEATING
- REAR SEATS
- SAFETY RESTRAINTS
- Personal Safety System™
- How does the Personal Safety System™ work?
- Driver and passenger dual-stage airbag supplemental restraints
- Front crash severity sensor
- Driver’s seat position sensor
- Front passenger sensing system
- Front safety belt usage sensors
- Front safety belt pretensioners
- Front safety belt energy management retractors
- Determining if the Personal Safety System™ is operational
- Safety belt precautions
- Combination lap and shoulder belts
- Energy management feature — front outboard
- Vehicle sensitive mode
- Automatic locking mode
- Safety belt height adjustment
- Safety belt pretensioner
- Safety belt extension assembly
- Safety belt warning light and indicator chime
- Conditions of operation
- Belt-Minder
- Personal Safety System™
- AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Important supplemental restraint system precautions
- Children and airbags
- How does the safety belt pretensioner and airbag supplemental restraint system work?
- Front passenger sensing system
- Determining if the system is operational
- Seat-mounted side airbag system
- Side-curtain airbag system
- SOS Post-Crash Alert System™
- Disposal of airbags and airbag equipped vehicles (including pretensioners)
- SAFETY RESTRAINTS FOR CHILDREN
- SAFETY SEATS FOR CHILDREN
- Tires, Wheels and Loading
- Driving
- STARTING
- ENGINE BLOCK HEATER (IF EQUIPPED)
- BRAKES
- ADVANCETRAC STABILITY ENHANCEMENT SYSTEM
- STEERING
- BRAKE-SHIFT INTERLOCK
- AUTOMATIC TRANSMISSION OPERATION
- Understanding the gearshift positions of the 6–speed automatic transmission equipped with a 2.5L I4 engine (if equipped)
- Understanding the gearshift positions of the 6–speed automatic transmission equipped with a 3.0L V6 Duratec engine (if equipped)
- Understanding your SelectShift Automatic™ transmission (SST) gearshift lever
- If your vehicle gets stuck in mud or snow
- MANUAL TRANSMISSION OPERATION (IF EQUIPPED)
- REVERSE SENSING SYSTEM (IF EQUIPPED)
- REARVIEW CAMERA SYSTEM (IF EQUIPPED)
- BLIND SPOT INFORMATION SYSTEM (BLIS) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED)
- ALL WHEEL DRIVE (AWD) SYSTEM (IF EQUIPPED)
- DRIVING THROUGH WATER
- Roadside Emergencies
- Customer Assistance
- GETTING THE SERVICES YOU NEED
- IN CALIFORNIA (U.S. ONLY)
- THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY)
- UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY)
- GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
- ORDERING ADDITIONAL OWNER’S LITERATURE
- REPORTING SAFETY DEFECTS (U.S. ONLY)
- REPORTING SAFETY DEFECTS (CANADA ONLY)
- Cleaning
- Maintenance and Specifications
- SERVICE RECOMMENDATIONS
- PRECAUTIONS WHEN SERVICING YOUR VEHICLE
- OPENING THE HOOD
- IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
- WINDSHIELD WASHER FLUID
- CHANGING THE WIPER BLADES
- ENGINE OIL
- BATTERY
- ENGINE COOLANT
- FUEL FILTER
- WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
- ESSENTIALS OF GOOD FUEL ECONOMY
- EMISSION CONTROL SYSTEM
- BRAKE/CLUTCH FLUID
- TRANSMISSION FLUID
- AIR FILTER
- MOTORCRAFT PART NUMBERS
- MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
- ENGINE DATA
- IDENTIFYING YOUR VEHICLE
- TRANSMISSION CODE DESIGNATIONS
- Accessories
- Ford Extended Service Plan
- Index

When the engine is cold, check the
level of the engine coolant in the
reservoir.
• The engine coolant should be at the FULL COLD level or within the
COLD FILL RANGE as listed on the engine coolant reservoir
(depending upon application).
• Refer to scheduled maintenance information for service interval
schedules.
If the engine coolant has not been checked at the recommended interval,
the engine coolant reservoir may become low or empty. If the reservoir is
low or empty, add engine coolant to the reservoir. Refer to Adding
engine coolant in this chapter.
Note: Automotive fluids are not interchangeable; do not use engine
coolant/antifreeze or windshield washer fluid outside of its specified
function and vehicle location.
Adding engine coolant
When adding coolant, make sure it is a 50/50 mixture of engine coolant
and distilled water. Add the mixture to the coolant reservoir, when the
engine is cool, until the appropriate fill level is obtained. If coolant is
filled to the COLD FILL RANGE or the FULL COLD level when the
engine is not cool, the system will remain underfilled.
WARNING: Do not add engine coolant when the engine is hot.
Steam and scalding liquids released from a hot cooling system
can burn you badly. Also, you can be burned if you spill coolant on hot
engine parts.
WARNING: Do not put engine coolant in the windshield washer
fluid container. If sprayed on the windshield, engine coolant
could make it difficult to see through the windshield.
COLD FILL RANGE
Maintenance and Specifications
286
2010 Milan (mln)
Owners Guide, 3rd Printing
USA (fus)