Maintenance and Service Guide

127,500 miles
Change engine oil and replace oil filter
Inspect cabin air filter (if equipped)
Rotate tires, inspect tires for wear and measure
tread depth
Inspect the wheels and related components for
abnormal noise, wear, looseness, or drag
Perform multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
135,000 miles
Change engine oil and replace oil filter
Replace cabin air filter (if equipped)
Inspect steering linkage, ball joints, suspension,
tie rod ends, driveshaft, and U-joints (lubricate if
equipped with Zerk fittings)
Torque the rear U-bolts (Transit Connect only)
Inspect engine cooling system and hoses
Inspect brake pads, shoes, rotors, drums, brake
lines and hoses and parking brake system.
Inspect half shaft boots (if equipped)
Inspect exhaust system and heat shields
Inspect automatic transmission fluid level (if
equipped with an underhood dipstick)
Inspect and lubricate 4x4 front axle U-joints
Rotate tires, inspect tires for wear and measure
tread depth
Inspect the wheels and related components for
abnormal noise, wear, looseness, or drag
Perform multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
N
ORMAL
S
CHEDULE
T
RUCKS
,F
ULLSIZE
V
ANS
& SUV
S
Scheduled Maintenance
25
2010 Scheduled Maintenance Guide (smg)
Scheduled Maintenance Guide, 1st Printing
USA (fus)
Normal Schedule
Trucks, Fullsize
Vans & SUVs