Owner's Manual

Replacing front parking lamp/turn signal bulbs

For bulb replacement, see your authorized dealer.

Replacing tail/stop/turn/backup bulbs

The tail/stop/turn/backup lamp bulbs are located in the same portion of

the tail lamp assembly, one just below the other. Follow the same steps

to replace either bulb:

1. Make sure the headlamp switch is

in the off position and then open

the liftgate to expose the lamp

assembly screws.

2. Remove the two screws from the

lamp assembly.

3. Carefully remove the lamp

assembly away from the vehicle by

pulling the assembly straight out to

expose the bulb socket.

4. Rotate the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull bulb straight out of socket and push in the new bulb.

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle and secure with

two screws.

Lights

2010 Mariner Hybrid (mhv)

Owners Guide, 1st Printing

USA (fus)