Installation guide

BLUETOOTH INTERFACE FOR SELECT 2003-UP
FORD, LINCOLN & MERCURY VEHICLES
BEEBF-24
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
MINI CONNECTORS SLIP SHEET INSTRUCTION
CONNECTION OPTION 1:
FOR EARLY TYPE RADIO MODELS: RADIO A, B, AND C.
CONNECT 1 AND 3.
CONNECT NUMBER 2 IF YOUR SYSTEM IS EQUIPPED WITH SUBWOOFER.
Note: FOR SOME OLDER VEHICLES THE FUNCTIONALITY WILL
NOT FUNCTION THROUGH THE RADIO.
All BT control function will be made from the SWC only. “
FORD
2004-2006 Crown Victoria
2007-2010 Edge
2004-2011 Escape
2006-2007 Escape Hybrid
2004-2010 Expedition
2004-2010 Explorer
2004-2012 F-150
2004-2010 F-250
2004-2010 F-350
2004-2010 F-450
2004-2010 F-550
2005-2007 Five Hundred
2009-2010 Flex
2004-2011 Focus
2004-2007 Freestar
2005-2007 Freestyle
2006-2011 Fusion
2004-2012 Mustang
2008-2010 Taurus
2004-2005 Thunderbird
LINCOLN
2003-2005 Aviator
2004-2006 LS
2006-2008 Mark LT
2009-2010 MKS
2010-2011 MKT
2006-2011 MKX
2006-2011 MKZ
2007-2011 Navigator
2004-2010 Town Car
2006-2006 Zephyr
MERCURY
2003-2005 Grand Marquis
2006-2010 Mariner
2006-2011 Milan
2005-2007 Montego
2004-2007 Monterey
2006-2010 Mountaineer
2008-2009 Sable
Special Note : For Lincoln 2007-upwards
Navigation Screen Radios:
1.Disconnect Red Wire on 2 PIN Molex
connector.
2.Disconnect Red Wire and White/Black Wire
on other 2 PIN Molex Connector.
3.If experiencing small audio on Subwoofer
when BT engaged , Connect Brown/White
wire Molex
Connectors (“SUBWOOFER ATTENUA-
TION “).
Important Note:
3.1 If this vehicle has THX system , Discon-
nect Brown/White wire Molex Connectors
APPLICATIONS
CONNECTION SLIP
SHEET
NOTE: This interface is not compatible with:
2004 - 2006 Vehicles With THX or Navigation
systems.
TROUBLESHOOTING
POSSIBLE ISSUE
POSSIBLE SOLUTION(S)
Is there noise coming from the Auxiliay input?
SUBWOOFER MUTE DIAGRAM
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
CAN-BUS VEHICLES
CAN-BUS AND ACC VEHICLES
ACC ONLY VEHICLES (NON-CAN)
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
3-PIN
(male plug)
TO FACTORY
RADIO
24-PIN
(male plug)
16-PIN
(male plug)
24-PIN
(male plug)
16-PIN
(male plug)
TO FACTORY
HARNESS
24-PIN
(male plug)
12-PIN
(male plug)
1
2
3
(Acc Turn-On)
(ATT)
(BUS)
Disconnect the CAN-BUS connector.
2-PIN CONNECTOR CONFIGURATION
What is the “Phone Mode Wire”? Connecting this cable will display “Phone Mode” durring a phone conversation.
SYNC COMPATIBLE
2007-UP RANGE
CONTROL ON RADIO
2005-2007 RANGE
NO CONTROL ON
RADIO
2003-2006 RANGE
These are the following ways to coonect the
2-PIN connectors. There are three ways that
the connectiosn can be used, for the
purpose of a wide year range.
A. For most 2007 and newer vehicles,
combination “A” will need to be used.
This leaves both 2-Pin connectors open
and disconnected.
B. For most 2005-2007 vehicles,
combination “B” will need to be used.
This leaves the white/black wire open
and the red wire may vary. Begin with leav-
ing the red wire disconnected, and if the
interface is not recognized properly please
try connecting it.
C. For most 2003-2006 vehicles,
combination “C” will need to be used.
This connects both 2-Pin conectors.
A.
B.
C.
OPEN
OPEN
VARIES
OPEN
CLOSED
CLOSED
Red
White/ Black
Red
White/ Black
Red
White/ Black
Note: If after a command the radio is powered “OFF”, you must power “ON” the radio to regain volume control.
Note: If an incoming call is answered from the mobile phone’s keypad,
the call will direct itself to the headset on the mobile phone. To re-direct the phone call to the “BEEBF-24”, it must be done directly from
the mobile phone.
Note: When transferring a phone call to the mobile phone for privacy, the user must re-connect the
BEEBF-24 and the mobile phone by selecting the module from the device menu on the phone.
Note: If after ending a call the radio is powered “OFF”, you must power “ON” the radio to regain volume control.
Note: The volume may vary at times. In order to correct the volume level, you must reset the volume knob to 0.
violet/ black wire (5.1V)
FACTORY SUBWOOFER PLUG
Located behind the radio.
PIN-4
The subwoofer mute wire is to be used when there is unwanted noise coming from the vehicles facotry subwoofer while
durring a phone call. To mute the subwoofer completely durring a phone call, please connect wire as follows:
To activate the subwoofer mute, t-tap the
violet and black wire on the 12-Pin connec-
tor to Pin-4 of the facory
subwoofer plug.
BT INTERFACE HARNESS
Located at the interface location.
PIN-VIEW