Installation guide
BLUETOOTH INTERFACE FOR SELECT 2003-UP FORD, LINCOLN & MERCURY VEHICLES
USING THE MENU STRUCTURE:
FOR RADIO TYPE “A”.
MISSED CALLS:
1. Press the “AM/FM” button twice.
2. Press the “AM/FM” button once to enter the menu options.
Continue to press the “AM/FM” button twice till you hear the
interface announce “MISSED CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
INCOMING CALLS:
1. Press the “AM/FM” button twice.
2. Press the “AM/FM” button once to enter the menu options.
Continue to press the “AM/FM” button twice till you hear the
interface announce “INCOMING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
OUTGOING CALLS:
1. Press the “AM/FM” button twice.
2. Press the “AM/FM” button once to enter the menu options.
Continue to press the “AM/FM” button twice till you hear the
interface announce “OUTGOING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
SETTING TTS VOLUME:
1. Press the “AM/FM” button twice.
2. Press the “AM/FM” button once to enter the menu options.
Continue to press the “AM/FM” button twice till you hear the
interface announce “SETTING VOLUME”, and wait for her
announcement.
3. Set the TTS volume by turning the volume knob and waiting for
the announcement. Each announcement will indicate the volume
level of the TTS.
4. When the desired volume level is reached, press the “PWR” button
once to select.
DELETE ALL PAIRED DEVICES:
This feature allows you to delete all paired devices on the interface.
The module does NOT allow the user to only clear one device. The
module will delete all previously paired devices only
1. Press the “AM/FM” button twice.
2. Press the “AM/FM” button once, to enter the menu options.
Continue pressing the “AM/FM” button twice till you hear the
interface announce “DO YOU WANT TO DELETE PAIRED
PHONE LIST”.
3. Press the “PWR” button once within 3 seconds to conrm.
4. The interface will ask “ARE YOU SURE”, press the “PWR”
button once to re-conrm..
Note: The menu structures only remember the last 24
numbers in the call log from dialed from the mobile
phone.
Note: All menu structures work in 3 second increments.
If after 3 seconds the interface will time-out.
BEEBF-24
VOICE DIAL HOLD MEDIA BUTTON FOR 2 SEC.
ANSWER CALL PRESS SEEK UP ONCE
END CALL PRESS SEEK DOWN ONCE
REJECT CALL PRESS SEEK DOWN ONCE
ANSWER 2ND CALL PRESS SEEK UP ONCE
SWITCH CALLS PRESS SEEK UP ONCE
ENTER PRIVACY MODE PRESS SEEK UP ONCE
INCREASE VOLUME PRESS VOLUME +
DECREASE VOLUME PRESS VOLUME -
USING THE STEERING WHEEL CONTROLS (NEW STYLE)
ANSWER
END
- VOL +
MEDIA
OK
VOICE DIAL
USING THE MENU STRUCTURE:
FOR RADIO TYPE “B”.
MISSED CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “MISSED CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
INCOMING CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “INCOMING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
OUTGOING CALLS:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “OUTGOING CALLS”, and wait for the numbers
to be announced.
3. When the number you wish to dial is announced, press the “PWR”
button once to make the call.
SETTING TTS VOLUME:
1. Press the “PWR” button twice.
2. Press the “PWR” button once to enter the menu options.
Continue to press the “PWR” button twice till you hear the
interface announce “SETTING VOLUME”, and wait for her
announcement.
3. Set the TTS volume by turning the volume knob and waiting for
the announcement. Each announcement will indicate the volume
level of the TTS.
4. When the desired volume level is reached, press the “PWR” button
once to select.
DELETE ALL PAIRED DEVICES:
This feature allows you to delete all paired devices on the interface.
The module does NOT allow the user to only clear one device. The
module will delete all previously paired devices only
1. Press the “PWR” button twice.
2. Press the “PWR” button once, to enter the menu options.
Continue pressing the “PWR” button twice till you hear the
interface announce “DO YOU WANT TO DELETE PAIRED
PHONE LIST”.
3. Press the “PWR” button once within 3 seconds to conrm.
4. The interface will ask “ARE YOU SURE”, press the “PWR”
button once to re-conrm..
Note: The menu structures only remember the last 24
numbers in the call log from dialed from the mobile
phone.
Note: All menu structures work in 3 second increments.
If after 3 seconds the interface will time-out.
MEM
VOL
+
-
NEXT
VOL
+
-
MEDIA
END
ANSWER
IMPORTANT NOTE:
FOR SOME OLDER FORD AND LINCOLN VEHICLES.
FOR OLDER VEHICLES WITH STEERING WHEEL CONTROL:
If your vehicle is equipped with steering wheel control that contain
a “MEM’ button, the controls on your radio controls will not function
while using the Bluetooth interface.
All functions will be made from the steering wheel controls only.
VOICE DIAL HOLD MEDIA BUTTON FOR 2 SEC.
ANSWER PRESS MEMORY BUTTON ONCE
END HOLD MEMORY BUTTON FOR 2 SEC.
REJECT HOLD MEMORY BUTTON FOR 2 SEC.
ANSWER 2ND CALL PRESS MEMORY BUTTON ONCE
SWITCH CALLS PRESS MEMORY BUTTON ONCE
ENTER PRIVACY MODE PRESS MEMORY BUTTON ONCE
INCREASE VOLUME PRESS VOLUME +
DECREASE VOLUME PRESS VOLUME -
ENTER VOICE MENU HOLD MEDIA BUTTON FOR 2 SEC.
THEN PRESS MEDIA TO NAVIGATE.
USING THE STEERING WHEEL CONTROLS (OLD STYLE)
MEM
VOL
+
-
NEXT
VOL
+
-
MEDIA
ANSWER/ END
NOTE: This interface is not compatible with:
2004 - 2006 Vehicles With THX or Navigation
systems.
5-BUTTON
4-BUTTON
SAME FUNCTION
SAME FUNCTION
FORD
2004-2006 Crown Victoria
2007-2010 Edge
2008-2012 Escape
2004-2010 Expedition
2004-2010 Explorer
2004-2012 F-150
2004-2012 F-250
2004-2012 F-350
2004-2012 F-450
2004-2012 F-550
2005-2007 Five Hundred
2009-2012 Flex
2004-2011 Focus
2004-2007 Freestar
2005-2007 Freestyle
2006-2012 Fusion
2004-2012 Mustang
2008-2010 Taurus
2004-2005 Thunderbird
LINCOLN
2003-2005 Aviator
2004-2006 LS
2006-2008 Mark LT
2009-2010 MKS
2010-2011 MKT
2006-2011 MKX
2006-2011 MKZ
2007-2011 Navigator
2004-2010 Town Car
2006-2006 Zephyr
MERCURY
2003-2005 Grand Marquis
2006-2010 Mariner
2006-2011 Milan
2005-2007 Montego
2004-2007 Monterey
2006-2010 Mountaineer
2008-2009 Sable
Disclaimer: If your manufacturing build date is near
the cut o of the next year model, you may have a
dierent style of harness. If your harness is dierent
please contact us for updates.
Special Note : For Lincoln 2007-upwards
Navigation Screen Radios:
1.Disconnect Red Wire on 2 PIN Molex connector.
2.Disconnect Red Wire and White/Black Wire on
other 2 PIN Molex Connector.
3.If experiencing small audio on Subwoofer when BT
engaged , Connect Brown/White wire Molex
Connectors (“SUBWOOFER ATTENUATION “).
Important Note:
3.1 If this vehicle has THX system , Disconnect
Brown/White wire Molex Connectors
APPLICATIONS