Owner's Manual
Table Of Contents
- Table of Contents
- Introduction
- Instrument Cluster
- Entertainment Systems
- AUDIO SYSTEMS
- GENERAL AUDIO INFORMATION
- NAVIGATION SYSTEM (IF EQUIPPED)
- SYNC SYSTEM (LATE AVAILABILITY — IF EQUIPPED)
- Climate Controls
- Lights
- Driver Controls
- MULTI-FUNCTION LEVER
- TILT/TELESCOPE STEERING WHEEL
- ILLUMINATED VISOR MIRROR (IF EQUIPPED)
- OVERHEAD CONSOLE
- CENTER CONSOLE
- CLOCK
- INSTRUMENT PANEL STORAGE COMPARTMENT
- AUXILIARY POWER POINT (12VDC)
- POWER WINDOWS
- INTERIOR MIRROR
- EXTERIOR MIRRORS
- SPEED CONTROL
- STEERING WHEEL CONTROLS (IF EQUIPPED)
- MOON ROOF (IF EQUIPPED)
- MESSAGE CENTER
- Selectable features
- Reset
- Info menu
- Odometer/Trip odometer
- Distance to empty (DTE)
- Average fuel economy (AFE)
- Average Speed
- Trip elapsed drive time
- Compass display (if equipped)
- Compass zone/calibration adjustment
- Setup menu
- System check
- Units (English/Metric)
- Language
- Easy entry/exit (if equipped)
- Reverse Sensing System (Park assist) (if equipped)
- System warnings
- Selectable features
- INTERIOR TRUNK CONTROL
- Locks and Security
- KEYS
- POWER DOOR LOCKS
- CHILDPROOF DOOR LOCKS
- INTERIOR LUGGAGE COMPARTMENT RELEASE
- REMOTE ENTRY SYSTEM
- KEYLESS ENTRY SYSTEM (IF EQUIPPED)
- SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM
- PERIMETER ALARM SYSTEM
- Seating and Safety Restraints
- SEATING
- REAR SEATS
- SAFETY RESTRAINTS
- Personal Safety System™
- How does the Personal Safety System™ work?
- Driver and passenger dual-stage airbag supplemental restraints
- Front crash severity sensor
- Driver’s seat position sensor
- Front passenger sensing system
- Front safety belt usage sensors
- Front safety belt pretensioners
- Front safety belt energy management retractors
- Determining if the Personal Safety System™ is operational
- Safety belt precautions
- Combination lap and shoulder belts
- Energy Management Feature — Front Outboard
- Vehicle sensitive mode
- Automatic locking mode
- Safety belt pretensioner
- Safety belt height adjustment
- Safety belt extension assembly
- Safety belt maintenance
- Safety belt warning light and indicator chime
- Conditions of operation
- Belt-Minder
- Personal Safety System™
- AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Important supplemental restraint system precautions
- Children and airbags
- How does the safety belt pretensioner and airbag supplemental restraint system work?
- Front passenger sensing system
- Determining if the system is operational
- Seat-mounted side airbag system
- Side curtain airbag system
- Disposal of airbags and airbag equipped vehicles (including pretensioners)
- SAFETY RESTRAINTS FOR CHILDREN
- SAFETY SEATS FOR CHILDREN
- Tires, Wheels and Loading
- Driving
- Roadside Emergencies
- Customer Assistance
- GETTING THE SERVICES YOU NEED
- IN CALIFORNIA (U.S. ONLY)
- THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY)
- UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY)
- FORD EXTENDED SERVICE PLAN
- GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
- ORDERING ADDITIONAL OWNER’S LITERATURE
- REPORTING SAFETY DEFECTS (U.S. ONLY)
- REPORTING SAFETY DEFECTS (CANADA ONLY)
- Cleaning
- Maintenance and Specifications
- SERVICE RECOMMENDATIONS
- PRECAUTIONS WHEN SERVICING YOUR VEHICLE
- OPENING THE HOOD
- IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
- WINDSHIELD WASHER FLUID
- CHANGING THE WIPER BLADES
- ENGINE OIL
- BATTERY
- ENGINE COOLANT
- FUEL FILTER
- WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
- ESSENTIALS OF GOOD FUEL ECONOMY
- EMISSION CONTROL SYSTEM
- POWER STEERING FLUID
- BRAKE/CLUTCH FLUID
- TRANSAXLE FLUID
- AIR FILTER
- MOTORCRAFT PART NUMBERS
- MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
- ENGINE DATA
- IDENTIFYING YOUR VEHICLE
- TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
- Accessories
- Index

• Turning the key in the ignition to the 3 (RUN) position.
Note: This feature is configured off by default. This feature can be
turned on or off using the following procedure:
Before starting, ensure the ignition is in the 1 (LOCK) position and all
vehicle doors are closed. You must complete Steps 1–5 within 30 seconds
or the procedure will have to be repeated. If the procedure needs to be
repeated, wait a minimum of 30 seconds before beginning again.
1. Place the key in the ignition and turn the ignition to the 3 (RUN)
position.
2. Press the power door unlock control on the door panel three times.
3. Turn the ignition from the 3 (RUN) position to the 1 (LOCK) position.
4. Press the power door unlock control on the door panel three times.
5. Turn the ignition back to the 3 (RUN) position. The horn will chirp
one time to confirm programming mode has been entered and is active.
6. Press the power door lock control on the door panel two times within
five seconds. The horn will chirp one time to confirm the feature is off;
the horn will chirp one time and honk one time to confirm the feature is
on.
7. Turn the ignition from the 3 (RUN) position to the 1 (LOCK) position.
The horn will chirp one time to confirm the programming mode has been
exited.
Repeat the procedure to turn the feature on or off.
Autolock feature
The autolock feature will lock all the doors when:
• all the doors are closed,
• the ignition is in the 3 (RUN) position,
• you shift into any gear putting the vehicle in motion, and
• the vehicle attains a speed greater than 12 mph (20 km/h).
The autolock feature repeats when:
• any door is opened then closed while the ignition is in the 3 (RUN)
position and the vehicle speed is 9 mph (15 km/h) or lower, and
• the vehicle then attains a speed greater than 12 mph (20 km/h).
Note: The autolock feature is not available on vehicles equipped with a
manual transmission
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
95